High Density Poly Ethylene

H.D.P.E. is a very rigid material for use in general plant engineering, tank construction and waste water industries. Where all round chemical resistance and weather ability is required.

High Density Poly Ethylene HDPE BCJ Plastic Products

Typical Properties

  • Good impact resistance
  • High mechanical strength
  • Resistant to many solvents
  • Very good electrical insulator
  • Excellent abrasion resistance
  • Very high damping properties
  • Continuous use temp. of -45 to 100 Deg. Cent.
  • Minimum water absorption (0.01%)

Chemical Resistance

HDPE is resistant to Acids, Salts & salt solutions, Alcohols, oils, fats, waxes & many solvents.
All PE material is affected by strong oxidizing agents such as nitric acid, chromic acid or halogens.
Aromatics and Halogenated hydrocarbons cause swelling.

U.V. Resistance

Sheet & Rod products of HDPE are supplied in two colours.

  • White which is non UV
  • Black which is UV


Machine guards, water tanks, chemical tanks, cutting boards, pipe fittings & component parts.

Colour Range

  • White which is non UV
  • Black – Has UV protection

HDPE can be supplied in Sheet & Rod

Sheet Thickness

White & Black 1.5, 3, 4.5, 5, 6, 10, 12, 15 20, 25, 30mm

Sheet Size

Sheet Sizes available are 3000 X 1500mm


Available rod diameter is Black Only

2 m Lengths

25, 30, 35, 40, 45, 50, 65, 70, 75mm

1 m Lengths

80, 90, 100mm

0.5 m Lengths

110, 125, 150mm

Cut to Size Sheet

We offer a cut to size service for HDPE Sheet.

Cut to Size Rod

We offer a cut to size service for HDPE Rod.- 25 to 45mm O.Dia. must be purchased in full length only

  • 50mm diameter & over MINUMUM cut to size is 500mm

Are you ready to find out if we can make your vision a reality?

Take a minute and answer a couple questions and we can get in touch with some options.